System safety analysis: fault trees and FMEA
CSP video lesson, 6:32. CSP Domain 3: Risk Management
Compare inductive FMEA and deductive fault tree analysis for the CSP exam: top events, gates, faults versus failures, cut sets, the rare event approximation, and FMECA severity categories.
Included with every CSP pass, with captions, chapters and the full transcript. Every rule and number is cited on screen to its primary source.
What this lesson covers
In this lesson, you'll learn to: contrast inductive and deductive analysis, distinguish a fault from a failure, build a tree from top event to gates and cut sets, and apply AND and OR probability math and FMECA severity categories. System analysis has two approaches. FMEA is inductive. Fault tree analysis is deductive.
- Intro
- Learning objectives
- Two approaches
- Inductive methods
- FMECA
- Definitions
- Building a tree
- Cut sets and path sets
- Gate math
- On the job
- Common exam traps
- Recap quiz
The video, captions and full transcript are included with every CSP pass. See passes
More CSP lessons
PPE hazard assessment and selectionCSP lesson, 6:45How 1910.132 requires employers to assess hazards, select and fit PPE, certify the assessment in writing, train employees, and pay for equipment, plus 1910.134 respirator selection.
Process hazard analysis under PSMCSP lesson, 6:41What OSHA's PSM standard requires in a process hazard analysis: methodologies, required topics, team makeup, findings, five-year revalidation and records, for the CSP exam.
Risk matrix and fault tree probabilityCSP lesson, 6:25How the military system safety standard combines severity and probability into a Risk Assessment Code, and how to compute fault tree AND and OR gate probabilities for independent events on the CSP exam.
See where you stand on the CSP
25 questions, free, no card. You get a readiness score for each CSP domain.
ASP®, CSP® and CHST® are registered marks of BCSP. PassCited is not affiliated with or endorsed by BCSP.