Fall Protection and Scaffold Training questions for the CHST
CHST5 Domain 4: Leadership, Communication, and Training (S4.1 Site-specific training requirements). 2 free questions below. Every answer quotes and links the regulation paragraph it rests on.
Regulations covered
- 29 CFR 1926.454 Training requirements.How this section is tested
- 29 CFR 1926.503 Training requirements.
Text pulled from the eCFR, current as of 2026-10-14.
Question 1
A roofing crew has current written fall protection training certifications. All of their training covered guardrail systems, which they have used for months. The contractor now switches the job to personal fall arrest systems with rope-grab lifelines, which none of the crew has used. The crew's supervisor wants them on the roof tomorrow. What must the employer do?
Show answer and source
Answer: B. Retrain the affected workers on the new system, because the change in fall protection equipment makes their earlier training obsolete
The crew was trained only on guardrails, so the change to personal fall arrest systems makes their previous training obsolete, and the standard requires retraining. A current certification record does not cover equipment the workers were never trained on. Waiting for unsafe use to appear is wrong because the change itself triggers retraining.
Answer B rests on
29 CFR 1926.503(c)(2)(opens ecfr.gov in a new tab)“(2) Changes in the types of fall protection systems or equipment to be used render previous training obsolete; or”
Question 2
A crew of laborers will work from a supported scaffold set up beside a building, with energized overhead power lines running near the work area. A qualified person trained them on proper use of the scaffold, handling materials on the platform, and fall hazards. Electrical hazards were not discussed. The superintendent says the training is complete because a qualified person delivered it. What does the standard require here?
Show answer and source
Answer: B. The training must also cover the nature of the electrical hazards in the work area, since the power lines are present
The standard requires training to include the nature of electrical, fall and falling object hazards in the work area, as applicable. Energized lines near the scaffold make electrical hazards applicable, so leaving them out is a gap even though a qualified person gave the training. The idea that the trainer's qualification alone makes the training adequate is wrong because the content must also fit the hazards present.
Answer B rests on
29 CFR 1926.454(a)(1)(opens ecfr.gov in a new tab)“(1) The nature of any electrical hazards, fall hazards and falling object hazards in the work area;”
22 more fall protection and scaffold training questions in the full CHST bank
Related topics
Original practice questions, not real exam items. PassCited is not affiliated with or endorsed by BCSP.