Forklifts, Cranes, Slings and Aerial Lifts practice questions for the CSP exam
CSP11 Domain 1: Advanced Application of Safety Principles (1.6 Materials handling methods and controls). 3 free questions below. Every answer quotes and links the regulation paragraph it rests on.
- 29 CFR 1910.178: Powered industrial trucks. · how this section is tested
- 29 CFR 1910.184: Slings.
- 29 CFR 1926.453: Aerial lifts.
Text pulled from the eCFR, current as of 2026-10-14.
A rigging crew finds a synthetic web sling with a torn edge. A supervisor suggests having an experienced crew member stitch the tear with heavy thread so the sling can be used for the rest of the shift. What does the standard require?
Show answer and source
Answer: A. The sling may not be used unless it is repaired by a sling manufacturer or an equivalent entity
The standard bars use of repaired synthetic web slings unless the repair was made by a sling manufacturer or an equivalent entity. An in-house inspection or a capacity reduction does not make a field repair acceptable, and temporary repairs are never allowed.
“Synthetic web slings which are repaired shall not be used unless repaired by a sling manufacturer or an equivalent entity.”
While preparing a new battery-changing area for electric lift trucks, a safety professional reviews the plan. It includes a designated charging room with an eyewash-style flushing station for spilled electrolyte, fire extinguishers, ventilation for gassing batteries, and wheel guards protecting the chargers from truck impact. Batteries would be removed from trucks by two workers who slide them onto a cart and then lift them onto the charging rack by hand. The plan also states that a carboy tilter will be used for electrolyte. Which gap in the plan does the standard require to be corrected?
Show answer and source
Answer: A. The plan must provide a conveyor, overhead hoist, or equivalent material handling equipment for handling batteries instead of hand lifting
The standard requires a conveyor, overhead hoist, or equivalent material handling equipment for handling batteries, so manual lifting by workers leaves a gap even though the other listed facilities are present. A carboy tilter is acceptable because the standard calls for a tilter or a siphon, and charging must be in a designated area, not wherever trucks park.
“A conveyor, overhead hoist, or equivalent material handling equipment shall be provided for handling batteries.”
During an audit of a warehouse's battery charging area, a safety professional observes four electric lift trucks on charge. Which observation is a deficiency under the standard?
Show answer and source
Answer: B. A truck is being charged with its battery compartment cover latched shut while charging is in progress
The standard requires the battery or compartment cover to be open so heat dissipates, so a cover latched shut during charging is a deficiency. The other observations match the requirements to position the truck and apply the brake, keep vent caps functioning, prohibit smoking, and prevent open flames.
“Care shall be taken to assure that vent caps are functioning. The battery (or compartment) cover(s) shall be open to dissipate heat.”
Unlock every CSP question with timed practice, the AI tutor and full-length mocks. Or start with the free diagnostic.
Related topics
Original practice questions, not real exam items. PassCited is not affiliated with or endorsed by BCSP.