Excavation and Trenching practice questions for the ASP exam
ASP11 Domain 2: Safety Programs and Concepts (2.8.a Trenching and excavations). 2 free questions below. Every answer quotes and links the regulation paragraph it rests on.
- 29 CFR 1926.651: Specific excavation requirements. · how this section is tested
- 29 CFR 1926.652: Requirements for protective systems. · how this section is tested
Text pulled from the eCFR, current as of 2026-10-14.
A excavation contractor is sloping the sides of a trench using tabulated data that a registered professional engineer approved. The written tables list the soil parameters affecting selection and the maximum safe slopes, and they name the approving engineer. The competent person on site wants to check the trench slope against the tables, but the only copy is in the home-office files 40 miles away, where the project manager says it is available on request. Construction of the sloping system is underway. What is the correct assessment?
Show answer and source
Answer: C. Not compliant, because at least one copy of the data identifying the approving engineer must be kept at the jobsite while the protective system is being constructed
The standard requires at least one copy of the engineer-identified tabulated data at the jobsite during construction of the protective system, so a home-office copy does not comply. Off-site storage is allowed only after that construction period, which is why the tempting off-site option is wrong.
“At least one copy of the tabulated data which identifies the registered professional engineer who approved the data, shall be maintained at the jobsite during construction of the protective system. After that time the data may be stored off the jobsite, but a copy of the data shall be made available to the Secretary upon request.”
A crew is installing aluminum hydraulic shoring in a 12-foot trench. After a dump truck backs into the stack of materials, the competent person finds one cylinder with a bent rod. She inspects it, but she cannot confirm that it can carry the loads it was designed for. The crew lead proposes: (1) pull the cylinder from the trench and set it aside, (2) put it back into service once the manufacturer's sales representative says it looks acceptable. Which action is required by the standard before that cylinder can be used in the trench again?
Show answer and source
Answer: D. Evaluation and approval by a registered professional engineer, since the competent person could not assure its suitability
Because the competent person cannot assure the damaged cylinder can support the intended loads, it must be removed from service and then evaluated and approved by a registered professional engineer before reuse. A sales representative's opinion or a repeat inspection by the competent person does not satisfy the standard, and neither does relocating the cylinder to a lighter-load area.
“If the competent person cannot assure the material or equipment is able to support the intended loads or is otherwise suitable for safe use, then such material or equipment shall be removed from service, and shall be evaluated and approved by a registered professional engineer before being returned to service.”
Unlock every ASP question with timed practice, the AI tutor and full-length mocks. Or start with the free diagnostic.
Related topics
Original practice questions, not real exam items. PassCited is not affiliated with or endorsed by BCSP.